Regenerate. Reuse. Revolutionize.

Regenerated RO membranes, individually tested,at 30 to 50% less cost.

Every element starts as a spent seawater element from a desalination plant. We regenerate it in our own process, and test every one on its own to ISO 20466:2024.

Operator loading a regenerated element into a test vessel at the 2ndLifeRevive plant
10,000+
elements regenerated
150+ tonnes
of plastic kept out of landfill
5+ years
of R&D behind our own process
3-year
prorated limited warranty

Read the article excerpt (PDF)


The industry default

32,000 tonnes of membranes are binned every year.

A reverse osmosis element runs 3 to 5 years in a desalination plant. Then it comes out, and almost all of it goes to landfill. The polyamide, the fibreglass shell, the permeate tube, the spacers. All of it.

Most of those elements still have a working selective layer. That's the part the industry throws away.

Spent reverse osmosis elements dumped at an end of life yard
End-of-life yard. This is what the default looks like.

What we do

Cleaning removes fouling.Our regeneration changes membrane performance.

Our own regeneration process runs in our 2ndLifeRevive plant in Ras Al Khaimah, developed over 5 years. A spent seawater element goes in. A regenerated product with defined performance comes out, in 3 steps.

Tested to ISO 20466:2024, every element tested on its own

1 · Identify

6 checks by hand at intake

The elements that can't take a second life stop there and go to our Zero Waste to Energy project.

2 · Transform · our own process

A controlled, stable transformation of the membrane surface

That's how we make High Flow, High Rejection and Super High Rejection on purpose.

3 · Validate

Every element tested on its own

On our test bay, to ISO 20466:2024. Its own figures decide its grade, and it ships with a 3-year prorated limited warranty.

How our process works →

Watch

The process in 30 seconds.

Inside our plant: where spent elements arrive, what our process does to them, and what leaves on the pallet.

What sets our elements apart

Rinsed and resold, against a full regeneration.

Common market practice
  • Process. A clean-in-place at best, then a new box.
  • Performance. Whatever is left after cleaning.
  • Testing. Resold with no confirmed performance.
  • Traceability. Unknown history, no serial number.
  • Grading. No standard behind the label.
  • Warranty. Little or none.
Second Life RO
  • Process. Full regeneration in our own process, in our own plant.
  • Performance. Rejection and flow set by our process to 1 of 3 grades.
  • Testing. 6 checks in, a performance test, 5 checks out.
  • Traceability. Serial number and test data for every element.
  • Grading. An ISO 20466:2024 class for every element.
  • Warranty. 3-year prorated limited warranty.
At Lenntech, we are selective about the products we bring to market. Second Life RO membranes earned a place in our portfolio because of their commitment to individual testing, quality verification, and a circular use.
David van LennepCEO, Lenntech
The 3 grades

1 line, 3 grades.

Every grade is an 8 inch element, tested to ISO 20466:2024, for non-potable duty. Serial numbered, vacuum-sealed and boxed, with a 3-year prorated limited warranty.

Second Life RO regenerated element with its carton and the 3-year prorated limited warranty seal
GradeSKUPermeate flow, GPD (m³/d)Min. salt rejectionISO class
High Flow2L-HF8040-T>10,050 (>38)>96.0%C4
High Rejection2L-HR8040-T>7,950 (>30)>98.5%B5
Super High Rejection2L-SHR8040-T>5,283 (>20)>99.3%A5

All 3 grades are tested at 2,000 ppm NaCl, 225 psi (15.5 bar g), 77 °F (25 °C), pH 8, 15% recovery. Permeate flow for individual elements may vary ±15%.

A regenerated element in front of a livestock manure lagoon, the kind of duty it's built for

Applications

Where a second-life element earns its place.

These are duties where cost per m³ decides the budget and the feed water is nowhere near first-pass seawater. High-frequency replacement is where the saving compounds.

Not for drinking water, or for any food or beverage meant for human consumption.

Water and reuse

Municipal wastewater and reuseBrackish water ROLandfill leachate

Industry

Refining and petrochemicalsOil and gas waterMiningPulp and paper

Farming

Agriculture and irrigationLivestock wastewater

We'll tell you when to walk away. For first-pass seawater at full spec, buy new, and we'll say so on the call. A regenerated element earns its place in less demanding, non-potable duty.

Per element

What every element gives you.

Save 30 to 50% cost
30 to 50% less cost than a new element
85 to 90% of new, rejection and flow
85 to 90% of a new element's rejection and flow
Save 15 kg plastic
15 kg of plastic kept out of the ground, per element
Up to 1 tonne of CO2e avoided
Up to 1 tonne of CO₂e avoided, per element

Inside the plant

Real elements, real water, real plant.

Every photograph in this section was taken at our own plant.

Hundreds of incoming elements standing on the plant floor, intake crates stacked behind
Plant control screen during a regeneration run
Fouled end cap on a spent element at intake
Operator in PPE checking elements in the intake crates
Operator in PPE carrying an element to an RO train
Regenerated element with its carton
Operator in PPE loading an element into a pressure vessel
Morgan Meinecke with one of the plant operators on the regeneration floor
Finished pallet of regenerated elements, serial numbered and boxed

Reviews

What our customers say on Google.

5.0 25 Google reviews
I manage a facility treating industrial wastewater, and switching to Second Life RO membranes was one of the best decisions we made. They're surprisingly affordable and work like a charm. Also, love the fact that we're helping the environment while saving money. A win-win in my book!
Margaret GuenenaIndustrial wastewater facility
As a farm owner, efficient and affordable irrigation water treatment is key. These membranes have exceeded my expectations in both quality and price.
Ahmed KamalFarm, irrigation water
Second Life is a clear choice for anyone seeking quality, highly efficient RO membranes with a heart for the environment. I'm thoroughly impressed.
Bengan HovgardGoogle review

Talk to us

Tell us the duty, and we'll tell you if it fits.

The application, the feed water, the flow and the quality you need out. That's enough for us to recommend a grade, quote a price and tell you straight whether regenerated fits the duty.

+971 7 244 8033

Received.

We reply from Ras Al Khaimah, GMT+4, usually the same working day.

Check your saving